Instructions For Taking Measurements
Instructions:
1.- To achieve a custom-made boot, it is essential to take these measurements very carefully.
2.- The person being measured should stand on a floor or table so that the person taking the measurements is in a comfortable position.
3.- Measurements should be taken without shoes, always wearing riding pants and the socks that will be used with the boots.
4.- Measurements should be taken as shown in the diagram, from bottom to top, starting from the first 15 cm, then every 5 cm until reaching the narrowest part of the leg below the knee.
5.- The circumference should be measured (over the indicated points) naturally and expressed to the millimeter.
6.- To measure the height, the leg should be flexed as if in a riding position, at the back of the leg (see point A).
7.- The last circumference measurement should be taken below the knee at the narrowest part (see point E).
8.- Points B, C, and D are taken when the person has a very high instep and wide foot.
9.- The length of the foot should be measured in centimeters, and the outline of the foot should be drawn with the pencil held perpendicular.
perpendicular.
Sections to Measure:
